Showing posts with label ace. Show all posts
Showing posts with label ace. Show all posts
Thursday, October 23, 2014
SamsungGalaxy Ace GT S5830i Update Guide S5830ZXXMK1 Android 2 3 6 Gingerbread Firmware
SamsungGalaxy Ace GT-S5830i [Update Guide] S5830ZXXMK1 Android 2.3.6 Gingerbread Firmware,
If your Galaxy Ace S5830 already running on the Android 2.3.6 Gingerbread, then you can only expect few bug fixes and performance enhancement with this latest firmware update. It is always recommended to update device to the latest available firmware.S5830ZXXMK1 Android 2.3.6 Gingerbread Firmware Last Updated on 22-Feb-2014. Update the latest ZXXMK1 Android 2.3.6 Gingerbread official firmware on Samsung Galaxy Ace GT-S5830i Smartphone. Samsung recently rolled out the firmware. The latest firmware build version is S5830ZXXMK1. The Galaxy Ace S5830i was released back in the year 2011 with Android 2.2 Froyo and receiving Android 2.3.6 Gingerbread from the beginning of the previous year (2012). There is no news about any Jelly Bean update for the device. If you not yet update your device to this latest official firmware, then you can now update the same using our simple tutorial below. You can check latest available firmware for your device through OTA (over the air) from Settings-About Phone-Software Update.
So, want to update your Galaxy Ace S5830i to the latest ZXXMK1 Android 2.3.6 Gingerbread firmware? For official process, either you can go for OTA update by following the above mentioned path or download and update firmware through the Samsung Kies utility. However, most of us prefer manual way to update official firmware. So, in this article you’ll find step by step manual guide to update the latest Android 2.3.6 ZXXMK1 firmware on your Galaxy Ace S5830i through Odin.
Android 2.3.6 Gingerbread S5830ZXXMK1 Official Firmware Download List
Samsung rolled out the firmware for the following countries. The firmware which are unbranded or not locked to any carrier, no matter of which country or region, can be flashed on any Galaxy Ace GT-S5830i model.
Russia: S5830ZXXMK1_S5830ZOXEMC2_SER.zip
Russia: S5830ZXXMK1_S5830ZOXEMC2_SER.zip
[Firmware for rest of the countries and carrier will be added here when available]
How to Install Android 2.3.6 Gingerbread Official Firmware on Galaxy Ace S5830i through Odin:
- Download Android 2.3.6 ZXXMK1 Firmware for Galaxy Ace S5830i from the above list
- Download Odin 3.07
- Switch off your phone and boot Galaxy Ace S5830i into Download Mode by pressing and holding the Volume Down+Home+Power buttons (long press until the boot screen appear), now press Volume Up key to proceed to Download Mode.
- Extract the downloaded Odin3.07 zip file and run the Odin3 v3.07.exe file as an administrator (Right click on the .exe file and click on Run as administrator)
- Now connect your Galaxy Ace S5830i to your computer via USB cable
- In Odin3 screen, you should see a COM Port number like “0:[COM7]” at ID:COM section and “Added!” text at the message box. This means your device has been detected by Odin3.
- Make sure that, only the “Auto Reboot” and “F. Reset Time” options are checked.
- Now, extract the downloaded firmware zip file, you’ll find a firmware file with extension .tar.md5
- In Odin screen, click on PDA button and select the firmware file with .tar.md5 extension (The firmware file look something like: S5830XXDLJ5_S5830ODDDLI7_INU.tar.md5)
- Now, click on the Start button to begin the installation process, wait few moments.
- Once completed, you would see “PASS!” message in ID:COM port having green background
- Your phone should automatically reboot after completion
- You can now disconnect your phone from computer
- Finish
Thursday, October 2, 2014
Samsung Galaxy Ace GT S5830 S3 Evolutioned CynogenMod Rom
As I know You guyz would be Searching for a Rom where you can Make your smartphone much faster and over there I always try to get U the Same over.. So this rom is Quite like dat one only with less power consumng features and instant boot up etc...This rom is Just Likely Tweeked up to the one which are of New Samsung Galaxy S3 Evolutioned Rom and have been modded up to it!!!
HOW TO FLAST THE ROM:-
Feautures found Over:-
1)TouchwizUX from galaxy S3 (MDPI)
2)Based on CyanogenMod 9.0.4-RC1-MacławStudios
3)SGIII Real accu weather
4)Samsung galaxy s3 WallpaperChooser
5)SGSIII Icons
6)SGSIII Sounds
7)MusicHub Hub 3.0
8)SGSIII Live Wallpapers
9)S-voice Modded
10)Swype key
11)SG3 Clock widget
12)KiesCast
13)Application monitor widget
14)Memo
15)PicsPlay
16)Family Story
17)Polaris Office
18)You tube
19)Stock Video Player
20)Prima Wifi File
21)S suggest
22)Flipboard
23)Chat on
24)Samsung Apps
25)facebook Sns Account
26)Samsung Account Service
27)Postit
2)Based on CyanogenMod 9.0.4-RC1-MacławStudios
3)SGIII Real accu weather
4)Samsung galaxy s3 WallpaperChooser
5)SGSIII Icons
6)SGSIII Sounds
7)MusicHub Hub 3.0
8)SGSIII Live Wallpapers
9)S-voice Modded
10)Swype key
11)SG3 Clock widget
12)KiesCast
13)Application monitor widget
14)Memo
15)PicsPlay
16)Family Story
17)Polaris Office
18)You tube
19)Stock Video Player
20)Prima Wifi File
21)S suggest
22)Flipboard
23)Chat on
24)Samsung Apps
25)facebook Sns Account
26)Samsung Account Service
27)Postit
CHANGELOG
- remove temporary S2 touchwizclok i have some problem to recompil it ( i provide stock ace vertion for now)
- Nims Kernel V2.1
- Camera taking pictures , preview is working,settings working
(Sometimes camera service cant connect to camera - you must reopen application.)
- tweak Laucher stay in persistant memory
- missing Language added
- Mdpi TwCalculator
- Improve battery life tenfold by PureMotive
- Fix boot problem
- fix googleplay issue
- Apollo music player removed aand replaced by Miui themed Music player
- remove temporary S2 touchwizclok i have some problem to recompil it ( i provide stock ace vertion for now)
- Nims Kernel V2.1
- Camera taking pictures , preview is working,settings working
(Sometimes camera service cant connect to camera - you must reopen application.)
- tweak Laucher stay in persistant memory
- missing Language added
- Mdpi TwCalculator
- Improve battery life tenfold by PureMotive
- Fix boot problem
- fix googleplay issue
- Apollo music player removed aand replaced by Miui themed Music player
HOW TO FLAST THE ROM:-
[So Here am I with for the one You waiting For and Scrolling too.. Now Ill give u a perfect Way to Flash this Custom Rom... You would be Thinking this one Would be as Same as the one which Normally others are but not Like it Now.!! This One is Quite Different from Others.]
Before Flashing the Rom you Need to Root your Device to Avoid Administrational Settings.
If You Dont know to HOW TO ROOT Your Samsung Galaxy Ace Click Here.
If you Have already Rooted.. Procede further..
Procedure For Upgrading To Samsung Galaxy S3 Modded Rom is Quite Very Much Simple.. Follow the Steps Exactly Noted Below to Avoid Your Phone Getting Bricked Up or Having Any Other Issue Over..
Before install S3-Evolution-Beta3 :
I recommand Do a full wipe Before install for better Experience
Installation of S3-Evolution-Beta-3-Ultimate you need Ext3 or Ext4 Partition
Here is a tutorilal for Partition Your Sd-Card..
I recommand Do a full wipe Before install for better Experience
Installation of S3-Evolution-Beta-3-Ultimate you need Ext3 or Ext4 Partition
Here is a tutorilal for Partition Your Sd-Card..
Partition your sd-card:
Simplest way is to use "MiniTool Partition Wizard Home Edition" from http://www.partitionwizard.com/download.html
This tool is compatible with Windows 2000/XP/Vista & Windows 7
requirements: USB SD Card reader.
pull SD card from phone, insert into USB SD Card reader,you can do it with your usb cable mount Sd-crad. Windows should report new drive and content of the drive should be visible.
• step 1: Delete Old Partitions on SD card
[Note: this partition manager QUEUES the operations. So nothing is deleted and changed UNTIL you click "APPLY" and then confirm by clicking "OK".
WARNING! ]
Make sure you are Deleting Partition on SD card! (not your hard drive for example)
This step Deletes everything on SD card, so backup files first!
Dont be afraid, just read everything and think twice before selecting correct drive.
Do you see three gray icons on the bottom? Under each of them the capacity of each drive is listed, and SD CARD has slightly different icon.
Hard drives on the Lcdshot have 465.8GB and 74.5GB, and on the bottom, the SD card, with 3.8GB capacity.
• step 2: create FAT or FAT32 partition “ note that this partition is for storing your media, etc..”
select "Create As": PRIMARY
Select "File System:" FAT when you have 2GB or smaller card.
Select "File System:" FAT32 when you have 4GB or greater card.
• step 3: select the 2nd partition and select "Create As": PRIMARY
NOTE:
Stock roms with stock kernel will support fat32
Stock roms with custom kernels “ like CF-Root” may support both fat32/ext4 “check their threads”
Cm7/cm9 roms will support ext4
Here Is a NOTE:
For a wired reason, in both cm7/cm9 roms if formatted your 2nd partition with ext4 format, link2sd wont create mount script, unless you have selected ext3 “although the format was converted to ext4”
• step 4: finish
finally, click "apply" button on top left corner.
partitions will be created and card will be formatted.
Reattach your sd card to your phone and turn it on. (you can also do it With usb Connection )
Chose your Vertion Of Beta3 , Light or Ultimate copy it to sd-card
Reboot your phone to ClockWorkMod
Flash ClockWorkMod 5:
http://forum.xda-developers.com/atta...=743333&d=1318...
Install from sd-card
the Phone Reboot Automaticaly when installation Done
if It stay on blank Lcd remove the Baterry an turn on again
For better Performance :
go to settings , performance, processor, cpu governor select SmartassV2
dont forget to set on boot ^^
you can disable Surface Dithering
to have better Ui bar go to settings system notification drawler Widget buttons then select one more Toggle you can hide indicator too..
Simplest way is to use "MiniTool Partition Wizard Home Edition" from http://www.partitionwizard.com/download.html
This tool is compatible with Windows 2000/XP/Vista & Windows 7
requirements: USB SD Card reader.
pull SD card from phone, insert into USB SD Card reader,you can do it with your usb cable mount Sd-crad. Windows should report new drive and content of the drive should be visible.
• step 1: Delete Old Partitions on SD card
[Note: this partition manager QUEUES the operations. So nothing is deleted and changed UNTIL you click "APPLY" and then confirm by clicking "OK".
WARNING! ]
Make sure you are Deleting Partition on SD card! (not your hard drive for example)
This step Deletes everything on SD card, so backup files first!
Dont be afraid, just read everything and think twice before selecting correct drive.
Do you see three gray icons on the bottom? Under each of them the capacity of each drive is listed, and SD CARD has slightly different icon.
Hard drives on the Lcdshot have 465.8GB and 74.5GB, and on the bottom, the SD card, with 3.8GB capacity.
• step 2: create FAT or FAT32 partition “ note that this partition is for storing your media, etc..”
select "Create As": PRIMARY
Select "File System:" FAT when you have 2GB or smaller card.
Select "File System:" FAT32 when you have 4GB or greater card.
• step 3: select the 2nd partition and select "Create As": PRIMARY
NOTE:
Stock roms with stock kernel will support fat32
Stock roms with custom kernels “ like CF-Root” may support both fat32/ext4 “check their threads”
Cm7/cm9 roms will support ext4
Here Is a NOTE:
For a wired reason, in both cm7/cm9 roms if formatted your 2nd partition with ext4 format, link2sd wont create mount script, unless you have selected ext3 “although the format was converted to ext4”
• step 4: finish
finally, click "apply" button on top left corner.
partitions will be created and card will be formatted.
Reattach your sd card to your phone and turn it on. (you can also do it With usb Connection )
Chose your Vertion Of Beta3 , Light or Ultimate copy it to sd-card
Reboot your phone to ClockWorkMod
Flash ClockWorkMod 5:
http://forum.xda-developers.com/atta...=743333&d=1318...
Install from sd-card
the Phone Reboot Automaticaly when installation Done
if It stay on blank Lcd remove the Baterry an turn on again
For better Performance :
go to settings , performance, processor, cpu governor select SmartassV2
dont forget to set on boot ^^
you can disable Surface Dithering
to have better Ui bar go to settings system notification drawler Widget buttons then select one more Toggle you can hide indicator too..
Subscribe to:
Posts (Atom)