Solution Blogs

Showing posts with label update. Show all posts

Thursday, October 23, 2014

SamsungGalaxy Ace GT S5830i Update Guide S5830ZXXMK1 Android 2 3 6 Gingerbread Firmware

SamsungGalaxy Ace GT-S5830i [Update Guide] S5830ZXXMK1 Android 2.3.6 Gingerbread Firmware,

S5830ZXXMK1 Android 2.3.6 Gingerbread Firmware Last Updated on 22-Feb-2014. Update the latest ZXXMK1 Android 2.3.6 Gingerbread official firmware on Samsung Galaxy Ace GT-S5830i Smartphone. Samsung recently rolled out the firmware. The latest firmware build version is S5830ZXXMK1. The Galaxy Ace S5830i was released back in the year 2011 with Android 2.2 Froyo and receiving Android 2.3.6 Gingerbread from the beginning of the previous year (2012). There is no news about any Jelly Bean update for the device. If you not yet update your device to this latest official firmware, then you can now update the same using our simple tutorial below. You can check latest available firmware for your device through OTA (over the air) from Settings-About Phone-Software Update.

If your Galaxy Ace S5830 already running on the Android 2.3.6 Gingerbread, then you can only expect few bug fixes and performance enhancement with this latest firmware update. It is always recommended to update device to the latest available firmware.

So, want to update your Galaxy Ace S5830i to the latest ZXXMK1 Android 2.3.6 Gingerbread firmware? For official process, either you can go for OTA update by following the above mentioned path or download and update firmware through the Samsung Kies utility. However, most of us prefer manual way to update official firmware. So, in this article you’ll find step by step manual guide to update the latest Android 2.3.6 ZXXMK1 firmware on your Galaxy Ace S5830i through Odin.

Important Note:

"The firmware is released only for the Samsung Galaxy Ace GT-S5830i model, so don’t try this in any other android device. Check your device model number from Settings-About Phone. Also the tutorial is based on Windows PC. Follow all the pre-requisites, procedures and steps carefully to avoid breaking your phone".

Android 2.3.6 Gingerbread S5830ZXXMK1 Official Firmware Download List

Samsung rolled out the firmware for the following countries. The firmware which are unbranded or not locked to any carrier, no matter of which country or region, can be flashed on any Galaxy Ace GT-S5830i model.

Russia: S5830ZXXMK1_S5830ZOXEMC2_SER.zip

[Firmware for rest of the countries and carrier will be added here when available]

Pre-Requisites:

Check battery percentage, your device should have at least 60% battery power
Turn on USB Debugging mode, go to Settings-Developer Options-USB Debugging
Backup important data and settings to external storage- follow this guide
Install USB driver for your device on your computer- Download Samsung USB Driver

Points to be noted:

If you are using any Custom ROM such as- CyanogenMod, Paranoid Android, AOKP, SLIM ROMs etc, then it’ll replaced by this official Stock ROM
Custom Recovery (CWM or TWRP Recovery) will be replaced by Stock Recovery
After flashing official firmware, your device will no longer belongs to rooted device. However you can root your device any time after flashing the firmware.

All the above pre-requisites are very important and must follow before proceed to installation guide. Hope you get all the above points. Now, go through the below tutorial to install Android 2.3.6 S5830ZXXMK1 official firmware on Galaxy Ace S5830i.

How to Install Android 2.3.6 Gingerbread Official Firmware on Galaxy Ace S5830i through Odin:

Download Android 2.3.6 ZXXMK1 Firmware for Galaxy Ace S5830i from the above list
Download Odin 3.07
Switch off your phone and boot Galaxy Ace S5830i into Download Mode by pressing and holding the Volume Down+Home+Power buttons (long press until the boot screen appear), now press Volume Up key to proceed to Download Mode.
Extract the downloaded Odin3.07 zip file and run the Odin3 v3.07.exe file as an administrator (Right click on the .exe file and click on Run as administrator)
Now connect your Galaxy Ace S5830i to your computer via USB cable
In Odin3 screen, you should see a COM Port number like “0:[COM7]” at ID:COM section and “Added!” text at the message box. This means your device has been detected by Odin3.
Make sure that, only the “Auto Reboot” and “F. Reset Time” options are checked.
Now, extract the downloaded firmware zip file, you’ll find a firmware file with extension .tar.md5
In Odin screen, click on PDA button and select the firmware file with .tar.md5 extension (The firmware file look something like: S5830XXDLJ5_S5830ODDDLI7_INU.tar.md5)
Now, click on the Start button to begin the installation process, wait few moments.
Once completed, you would see “PASS!” message in ID:COM port having green background
Your phone should automatically reboot after completion
You can now disconnect your phone from computer
Finish

Congratulations, your Galaxy Ace S5830i is now updated to the latest and official ZXXMK1 Android 2.3.6 Gingerbread firmware. Hope you successfully completed the update process. If you followed everything as mentioned in the above tutorial, then your Galaxy Ace should now running on the latest Android 2.3.6 Gingerbread build version ZXXMK1. You can confirm the firmware update from Settings-About Phone.

Thursday, September 25, 2014

Miracle Eagle Eye v1 62 Update Full Installer

Sunday, September 14, 2014

Get Update Samsung Galaxy Grand Duos I9082 Using Android 4 2 2 XXUBNC1 Jelly Bean Official Firmware Guide

Samsung has recently released a new Android 4.2.2 Jelly Bean update for the Galaxy Grand Duos with model number GT-I9082. The new official firmware is now available as an Over-The-Air (OTA) update as well as through Samsung KIES.
Firmware details
PDA: I9082XXUBNC1
CSC: I9082OJVBNC1
MODEM: I9082XXUBNA3
Version: Android 4.2.2
Build date: Mar 04, 2014
Regions: United Arab Emirates, Afghanistan, Algeria, Egypt, Iran, Iraq, Kenya, Libya, Morocco, Nigeria, Pakistan, Saudi Arabia, South Africa, Tunisia, Turkey
Samsung Galaxy Grand Duos I9082 users who missed the OTA update notification or unable to access the update over Samsung KIES, may follow our step-by-step guide to install the update manually.
Pre-requisites
1. Install USB Drivers for Samsung Galaxy Grand Duos on the computer.
2. Enable USB Debugging Mode on the phone by navigating to Settings >> Developer Options.
3. Make a backup of all your important data before following the guide.
4. Ensure the battery of the phone is charged more than 80 percent.
5. The Android 4.2.2 XXUBNC1 Jelly Bean firmware is compatible only with the Galaxy Grand Duos (GT-I9082). Applying this to any incorrect variant might brick the device. Verify the model number of the Galaxy Grand Duos by navigating to Settings >> About Phone.

Files Required
1. Android 4.2.I9082XXUBNC1 Jelly Bean Firmware (Mirror Link) for Galaxy Grand Duos I9082
2. Odin 3.07

Steps to Update Galaxy Grand Duos I9082 with Android 4.2.2 XXUBNC1 Jelly Bean Firmware
Step 1: Extract Firmware zip file using WinRAR/7-Zip/WinZip or any other extracting tool, you will get a .tar.md5 file and some other files (optional).
Step 2: Extract Odin zip file and you will get Odin3 v3.07.exe along with few other files.
Step 3: Switch off the Galaxy Grand Duos.
Step 4: Boot the device into Download Mode by pressing and holding Volume Down, Home and Power buttons together until a construction Android robot icon with a warning triangle appears on Lcd. Now press the Volume Up button to enter Download Mode.
Step 5: Run Odin on the computer as an Administrator.
Step 6: Connect the Galaxy Grand Duos to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the device. When the device is connected successfully, the ID: COM box will turn to light blue with the COM port number. Additionally, the successful connected will be indicated by a message saying Added.

Step 7: Select the following files in Odin from extracted I9082XXUBNC1 firmware folder:

Click the PDA button and select the .tar.md5 file.
Click the Phone button and select file with MODEM in its name. Ignore if there is no such file.
Click the CSC button and select file with CSC in its name. Ignore if there is no such file.
Click the PIT button and select the .pit file. Ignore if there is no such file.

Step 8: In Odin, enable Auto Reboot and F. Reset Time checkboxes. Also, ensure the Re-Partition checkbox is chosen only if a .pit file was chosen in the previous step.
Step 9: Verify everything suggested in Step 7 and Step 8 is done correctly. Then hit the Start button to begin the installation process.
Step 10: Once the installation process completes, your phone will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect your device from the computer.

Samsung Galaxy Grand Duos I9082 should be now updated with Android 4.2.2 XXUBNC1 Jelly Bean official firmware. Head over to Settings >> About Phone to verify the software version running on the device.

Note: If Galaxy Grand Duos I9082 stuck at booting animation after Step 10 then go to recovery mode (press and hold the Volume Up, Home and Power buttons together) and perform Wipe data/Factory Reset and Wipe Cache Partition task before selecting reboot system now function. In recovery mode use Volume keys to navigate between options and Power key to select the option. Please note, performing wiping task will erase your device internal memory data and not external SD card data.

Read also: How to Root Galaxy Grand Duos I9082 on Android 4.2.2 Jelly Bean Firmware

Saturday, September 13, 2014

Miracle box update version 1 69 Full installer download

Miracle Box Update
Ver : 1.69
[16-Dec-2013]

v1.69 1.Android Modify ADB ROOT . 2.MTK Modify Android formate

Whats New

MIRACLE SET UPDOWNLOAD FROM HERE

Saturday, September 6, 2014

Install Jelly Bean 4 1 2 XXUBMEA OTA Update for Samsung Galaxy S4 I9500

The XXUBMEA firmware has been released last week for the I9505 Snapdragon Galaxy S4 smartphone, now you can install the same version of it but designed to work with the Exynos 5 Octa Galaxy S4 variant. Read this entire post and you should be able to complete the updating process in under 10 minutes.
If you didn’t receive the official OTA Update to XXUBMEA Jelly Bean 4.1.2 firmware, then you should use this guide to manually flash all the required files. The new update fixes several bugs that were present in the previous builds that were delivered with the Galaxy S4. More info about this update can be found here. In order to successfully complete the update, you will first have to take a look at the guidelines below:

use this guide only with the Samsung Galaxy S4 I9500 Exynos 5 Octa model. Don’t try to flash this firmware update on any other variant of the Galaxy S4 phone.
if your phone is rooted, then this update will revoke root access.
try to backup some of your most important files before starting the updating process.
if your smartphone doesn’t want to boot after you install XXUBMEA firmware, then you will be forced to apply some extra steps. You will need to boot into Recovery mode and factory reset the phone, which will delete data from your device.
download and install Samsung USB Drivers for your computer. Without these drivers your phone won’t be recognized by your computer and you will be forced to return here and reinstall them.
make sure that your PC doesn’t have the Samsung KIES software running while the ODIN program installs the new firmware update. Odin is a small program that is commonly used to flash tar.md5 files and other similar updating files for Samsung phones.
disable all the antivirus and other security applications from running on your computer.
enable USB Debugging from your phone’s Developer Options. If this menu doesn’t show up in Settings, then you need to open ‘About device’ section and then scroll down to ‘Build Number’. Tap the build number section 7 times for the Developer Options menu to be enabled.
make sure that you read the entire post before starting the update.
your phone’s battery power levels should be over 50%, as this will prevent it from powering off in the middle of the updating process.
don’t skip any steps that I have listed below, as you wouldn’t want to repeat the entire tutorial more than once.
this is a guide for advanced Android users and you shouldn’t attempt to use it in case you don’t know what you’re doing, as that will result in a failed attempt.
we cannot be blamed in case you lose any important files or you’ll brick the device in the process.
if you cannot complete the update, then you can ask for extra help in comments.

I think that these were all the instructions that you had to go over before starting to flash the updating files for your Exynos 5 Octa Galaxy S4 smartphone. Note that the updating process shouldn’t take more than 10 minutes to complete. Remember to read the extra instructions that I have listed at the end of this post only in case the device doesn’t want to boot with the new firmware update.

How to flash Android 4.1.2 XXUBMEA Jelly Bean OTA Update for the Samsung Galaxy S4 I9500:

Download the I9500XXUBMEA zip from HERE. Extract the contents of this file and save them on your PC desktop.
> you will get a file that is titled ‘I9500XXUBMEA_I9500OLBBMEA_XSE.tar.md5‘. Don’t extract any further than that.
Download Odin3 v3.07 from HERE. Extract the zip and place the files on your computer’s desktop screen.
Power off your smartphone completely.
Boot the device into Download Mode like this.
Launch the Odin exe on your computer.
Now, connect the device with your PC via USB cable.
> wait for ODIN to say that the new device has been ‘added!!’ and then you can continue to the next step.
> if the phone isn’t recognized, then you should plug it into another USB port or reinstall the Samsung USB Drivers using the download link listed in the preparation guide.
Next, click the ‘PDA’ button and find the I9500XXUBMEA_I9500OLBBMEA_XSE.tar.md5 file. Load it into Odin.
> don’t change any other default ODIN settings and make sure that Re-Partition option is not enabled.
Click the START button to begin the updating process and then wait several minutes for all the files to be successfully installed on your device.
When the update is complete ODIN will display a confirmation message and your Galaxy S4 Exynos 5 Octa phone will restart.
Unplug the phone from PC when the Samsung logo screen appears.
Wait for the phone to boot into normal mode and that should be all.
Test all the new features and then tell us in comments if the overall performance of your device has been improved by the XXUBMEA Jelly Bean update.

These were the steps that you needed to take in order to complete the installation. If every step was completed without problems and the phone has successfully booted into normal mode, then you can close the tutorial and begin to test the new OS version.
If you encountered problems with the update, then you should take a look at the notes below.
NOTE 1: if ODIN froze, it showed an error message or some other thing blocked the update from installing correctly, then you should disconnect the phone from computer. Close ODIN and remove the phone’s battery. Re-insert the battery after several seconds have passed and then you will need to repeat the entire tutorial once again until your device will boot with the new OS.
NOTE 2: if ODIN says that the update has been installed correctly, but the phone doesn’t go past the Samsung boot animation, then you will need to ‘factory reset’ the device using the Recovery mode. This means that you will have to read the extra steps listed below:

power off your Galaxy S4 completely by removing its battery.
re-insert the battery and then boot the phone into stock Recovery Mode.
select ‘wipe data/ factory reset’ option and confirm this process.
when the factory reset has been correctly applied, select ‘reboot system now’.
wait for your device to boot into normal mode.

I hope that the update was applied successfully for your Galaxy S4. If you have any other questions, then you should ask for extra help in our comments section below.

Saturday, August 23, 2014

News Update Asansam Box ASF version 1 1 2 Full Installer

ASF Version 1.1.2 Released

Add Tablet Z Series

Sony Xperia Tablet Z SPG311(Flash/Full Service)
Sony Xperia Tablet Z SPG312(Flash/Full Service)
Sony Xperia Tablet Z SPG321(Flash/Full Service)
Sony Xperia Tablet Z SPG341(Flash/Full Service)
Sony Xperia Tablet Z SPG351(Flash/Full Service)
Sony Xperia Tablet Z SO-03E(Flash/Full Service)

About Full service
============
Unlock Bootloader via Code
One click SRoot(DB Updated)
Read Lock Pattern
Write Kernel
Write custom Rom
Write System File

Download
============
ASF_Rev1.1.2.zip
============
Download and extract copy in c:/asf3 folder(need 1.1.1 setup)

ASB Box BY Asansam Team Samsung/Sony/Blackberry Supported

Just For Warm UP

BR
ASANGSM TEAM
CONTACT US