Nokia 1202 power switch ways
Showing posts with label ways. Show all posts
Showing posts with label ways. Show all posts
Thursday, December 18, 2014
Thursday, November 20, 2014
BLACK BEERY 8100 CHARGING WAYS 100 Tested solution
Wednesday, November 19, 2014
Tuesday, November 18, 2014
Nokia x1 01 Lcd Light Problem Solution Ways Jumper
problem is not lcd display light and keypad light also not getting on lighten.it is common fault of lcd pin 2 and 3.in diagram given bellow you can find these two lines with color so make jumper as shown in diagram.
on lcd prints strip can be scratched vary carefully and slightly so that it can be sold easily and then you can make jumper as i told above.
for more detail and new tips and tricks about this problem keep visiting this page we will update it timely with new diagrams.some related post are also given bellow you can read them also for more information.
Nokia 1650 Ringer Buzzer Ways Solution
1650 Ringer Problem 1650 Ringer Ways 1650 Ringer Jumpers 1650 Buzzer Problem 1650 Buzzer Ways 1650 Buzzer Jumpers
Friday, November 14, 2014
Nokia E7 00 charging and usb ways 100 working solution
Nokia E7-00 charging and usb ways 100% working solution if u have nokia e7-00 phone your phone all ok but problem charging not show and save i have this problem 100% working solution see my solution i think solved your problem
see this diagram all usb ways here i hope u understand this ways many problem solved see
nokia e7-00 charging line not working solution,usb not working solution,usb line damage only jumper done solution all solution working only 1 diagram i hope u solved your phone.
Nokia C2 03 Insert sim ways problem solution jumper
Nokia C2-03 insert sim problem, Sim is not working in Nokia C2-03, Sim is not Valid, Single Sim is not working in Nokia C2-03 Nokia 5800 volume up down not working solution
Nokia T4 and T5 key, Electronic meter, Electronics Cleaner, Hot Air, Solding Iron, Jumper Wire.
Diagnostic and Solutions.
if sim is not working in Nokia C2-03 is can be cause of water damage or missing components. Use different sim and if sim is not working then de assemble Nokia C2-03.
Once Mobile phone is disassemble check all these parts that are given in above diagram and apply electronics cleaner. Apply hot air so that it can be dry but not to much because it can damage the mother board or may can harm your skin.
these different color lines are indicating different path and tracks that are used in sim function in Nokia C2-03 so if nay of them is missing apply that jumper as shown in diagram to solve insert sim problem in Nokia C2-03
If single sim is not working out of these two you can only jumper those parts that are used by it. And to find prints and track you can see above diagram.
Warnings:
Do not apply to much heat it can damage the mother board and harm your skin.
When apply jumpers make sure the do not be ground with other prints.It can short the mobile phone.
Remove Sim Ic with hot air because with Solding iron it might can damage prints also.
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update daily this blog timely with other mobile solution.
Read More..
Nokia T4 and T5 key, Electronic meter, Electronics Cleaner, Hot Air, Solding Iron, Jumper Wire.
Diagnostic and Solutions.
if sim is not working in Nokia C2-03 is can be cause of water damage or missing components. Use different sim and if sim is not working then de assemble Nokia C2-03.
Once Mobile phone is disassemble check all these parts that are given in above diagram and apply electronics cleaner. Apply hot air so that it can be dry but not to much because it can damage the mother board or may can harm your skin.
these different color lines are indicating different path and tracks that are used in sim function in Nokia C2-03 so if nay of them is missing apply that jumper as shown in diagram to solve insert sim problem in Nokia C2-03
If single sim is not working out of these two you can only jumper those parts that are used by it. And to find prints and track you can see above diagram.
Warnings:
Do not apply to much heat it can damage the mother board and harm your skin.
When apply jumpers make sure the do not be ground with other prints.It can short the mobile phone.
Remove Sim Ic with hot air because with Solding iron it might can damage prints also.
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update daily this blog timely with other mobile solution.
Thursday, November 13, 2014
Nokia asha 200 Battery Terminal Points Damage Ways Problem Solution
Nokia Asha 200 Battery Terminal Points Damage Ways Problem Solution if in Nokia Asha 200 during changing battery terminal points you have loss battery points then you can solve this problem with this diagram bellow posted in this post.
![]( "Nokia")
there are three different color lines in this post shows that how you can make jumpers so check these links with meter and if any of them is broken make these jumpers with insulation wire.this diagram can help you in case Nokia Asha 200 is dead you can check these links so that battery crunt can pass through right ways and can be set on off.
for more detail and new tips and tricks about this problem keep visiting this page we will update it timely with new diagrams.some related post are also given bellow you can read them also for more information.
there are three different color lines in this post shows that how you can make jumpers so check these links with meter and if any of them is broken make these jumpers with insulation wire.this diagram can help you in case Nokia Asha 200 is dead you can check these links so that battery crunt can pass through right ways and can be set on off.
for more detail and new tips and tricks about this problem keep visiting this page we will update it timely with new diagrams.some related post are also given bellow you can read them also for more information.
Wednesday, November 12, 2014
Nokia 5800 power switch button ways solution power key not working
if Nokia 5800 is dead and not getting power on it can be problem of Nokia 5800 power switch button ways solution Nokia 5800 power key not working.So to diagnostic this fault plug in charging pin into it if charging symbol shows on it but can not be switch on button is not working.
![]( "Nokia")
to solve power switch button power key in Nokia 5800 you can follow steps as given in above diagram.check power button prints points with meter if value is good then replace power switch button in Nokia 5800 if value is not good then check all track which is given in red lines.red line print is to show positive print and other one is a ground print.
so apply this jumper as given in mobile diagram.
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update daily this blog timely with other mobile solution.
to solve power switch button power key in Nokia 5800 you can follow steps as given in above diagram.check power button prints points with meter if value is good then replace power switch button in Nokia 5800 if value is not good then check all track which is given in red lines.red line print is to show positive print and other one is a ground print.
so apply this jumper as given in mobile diagram.
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update daily this blog timely with other mobile solution.
Nokia C2 03 Lcd Display Problem Solution Ways Jumpers
Nokia C2-03 Blank Lcd Display, Nokia C2-03 White Lcd Display, Nokia C2-03 Lcd Jack Damage Prints Missing.Nokia 5230 Not Charging solution no response problem solution
To solve lcd display problem in Nokia C2-03 we have required a few tools and components.
Nokia screw Driver t5 and t4 for opening screw .
Lcd panel for Nokia C2-03
Electronics Cleaner for rust or water damage.
Hot air to dry the mother board.
Lcd Jack if we have to replace it.
Diagnosting & Solution:
After disassemble of Nokia C2-03 remove lcd and check lcd jack and its near by area for rust or water damages.
If here is some carbon on parts or at lcd jack.
Apply electronics cleaner and dry it with hot air for a few mint.
Do not apply so much heat it can harm your skin and mother board parts also.
Check with Lcd and if it is still blank replace with new one.
It might be possible that lcd jack pins are missing or not getting connected with lcd so change it.
Check all these links as given in above diagram in different colors so that you can find them easily.
Warnings:
Do not apply to much heat it can damage the mother board.
Make sure mother board is dry proper when you apply electronics clean.
Check Lcd jack and when removing it make sure solder has been melt.
If solder has not proper melt and you try to remove lcd jack prints might be damage.
When you replace lcd make sure lcd strip is proper fixed.
It can be damage when you assemble the phone if not in proper place.
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update daily this blog timely with other mobile solution.
Read More..
To solve lcd display problem in Nokia C2-03 we have required a few tools and components.
Nokia screw Driver t5 and t4 for opening screw .
Lcd panel for Nokia C2-03
Electronics Cleaner for rust or water damage.
Hot air to dry the mother board.
Lcd Jack if we have to replace it.
Diagnosting & Solution:
After disassemble of Nokia C2-03 remove lcd and check lcd jack and its near by area for rust or water damages.
If here is some carbon on parts or at lcd jack.
Apply electronics cleaner and dry it with hot air for a few mint.
Do not apply so much heat it can harm your skin and mother board parts also.
Check with Lcd and if it is still blank replace with new one.
It might be possible that lcd jack pins are missing or not getting connected with lcd so change it.
Check all these links as given in above diagram in different colors so that you can find them easily.
Warnings:
Do not apply to much heat it can damage the mother board.
Make sure mother board is dry proper when you apply electronics clean.
Check Lcd jack and when removing it make sure solder has been melt.
If solder has not proper melt and you try to remove lcd jack prints might be damage.
When you replace lcd make sure lcd strip is proper fixed.
It can be damage when you assemble the phone if not in proper place.
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update daily this blog timely with other mobile solution.
Tuesday, November 11, 2014
Nokia C2 03 Mic Problem Solution Jumper Ways Microphon
Nokia C2-03 Mic not working, Microphone is not working in Nokia C2-03, Voice is missing and can not reach to destination Mobile Phone, Mic problem, Microphone Solution in Nokia C2-03 Nokia 5230 power switch button ways solution power key not working Tools:-
Nokia T5 and T4 for disassemble.
Universal Microphone.
Electronics Cleaner.
Hot Air.
Electronics Meter.
Solding iron.
Diagnostics & Solutions:-
Before Disassemble of Nokia C2-03 make sure that mic whole in Cassing ( housing ) is opened. And here is not any dust in it. Disassemble the mobile phone and remove mic microphone from mother board with solding iron.
Check points on mother board with miter and if any value is missing check all these parts that are given in red and blue color in above diagram.If any of them is missing apply jumpers as described in above repairing picture.
Replace new mic and apply jumpers to its negative and positive points. On the mother board Red color line shows ground print and Blue line indicates positive print of mic. So this will help you to solve mic problem in nokia C2-03
Warnings:-
Apply solder on mic and Remove mic when it too hot so that mic print remain OK.
Don’t apply much heat with hot air it can damage the mother board.
Assemble with focus because if mic is not in its proper place voice will not reach to destination mobile. Or you will not be able to record voice in it.
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update daily this blog timely with other mobile solution.
Sunday, November 9, 2014
Micromax A106 Usb Ways Charging Solution
Micromax a106 not charging solution with Jumper Way ....
Micromax A106 usb Not Detected Problem Solution
Saturday, November 8, 2014
Friday, November 7, 2014
Wednesday, November 5, 2014
Nokia Asha 300 Power button On Off Switch Ways Jumpers Dead Problem Solution
Some time nokia asha 300 can be dead due to on off button problem. If on off button is not working in nokia asha 300 then it can not power on. So to solve this problem we have to follow a few steps that are given bellow and have to follow diagram bellow also.
![]( "Nokia")
Nokia Asha 300 Power button On Off Switch Ways Jumpers Dead Problem Solution To check that it is button fault we can make a simple test plug in charger and check is it working in off mode if you can see nokia asha 300 is charging ok in off mode then it means set is not totally dead. And problem is only that mobile can not become power on.
So remove key pad striker and check is there any rust carbon or water damage on off button if yes clean it and change the push of button. Check links with meter and if on off button does not show value outer is a ground you can apply jumper on any ground print. While inner is a positive print and going to resistance back of mother board. Apply jumper as shown in diagram in red color.
Nokia Asha 300 Power button On Off Switch Ways Jumpers Dead Problem Solution To check that it is button fault we can make a simple test plug in charger and check is it working in off mode if you can see nokia asha 300 is charging ok in off mode then it means set is not totally dead. And problem is only that mobile can not become power on.
So remove key pad striker and check is there any rust carbon or water damage on off button if yes clean it and change the push of button. Check links with meter and if on off button does not show value outer is a ground you can apply jumper on any ground print. While inner is a positive print and going to resistance back of mother board. Apply jumper as shown in diagram in red color.
Nokia 2320 Classic Camera Problem Solution Jumpers Ways
Nokia 2320 Classic you can not take pictures with Nokia 2320 Classic.Or it may can bluer your pictures.In starting diagnostics you can check camera settings in you phone and if there is not camera settings problem you can do a hardware.
After disassemble of Nokia 2320 Classic you can check all these parts that are given in above diagram with red lines.So make them clean if there is some rust or carbon parts.Apply heat with hot air and keep in mind do not apply much heat it can harm your skin and damage mother board also.
Re flow these parts and with resol ding the camera can be in normal condition.Check resistant with meter if they do not shows good value you can apply jumpers also.Replace Camera in last stage if above tips do notwork.
After disassemble of Nokia 2320 Classic you can check all these parts that are given in above diagram with red lines.So make them clean if there is some rust or carbon parts.Apply heat with hot air and keep in mind do not apply much heat it can harm your skin and damage mother board also.
Re flow these parts and with resol ding the camera can be in normal condition.Check resistant with meter if they do not shows good value you can apply jumpers also.Replace Camera in last stage if above tips do notwork.
Sunday, November 2, 2014
Sony Ericsson K300 K500 K700 Mic Ways Solution for Mic Not Working Problem
 |
| Easy Jumpers for K300/K500/K700 Mic Problem |
 |
 | ||
| Another interesting for K300 Mic Problem |
 |
| K300 Mic Solution |
Thursday, October 30, 2014
Nokia C2 01 Not Charging Problem Solution Jumper Ways
Nokia C2-01 shows not charging notification in it. It can be fault of charging ic or r22 resistance. While if it did not show any notification it may can be fault of missing components or It can be fault of Charging Base Nokia 2320 Classic Not Not Charging Problem Solution Jumpers see see all cellular mobile repairing solution.So In first step replace charger and if problem can not be solve with replacement of charger Dis assemble the mobile phone.
Change charging pin and try again if still charging problem remain same check all these tracks and parts that are given in above diagram. If any path or component is missing apply jumpers as identified in above repairing diagram for Nokia C2-01 not charging problem.
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.
Thursday, October 23, 2014
Blackberry 9900 cellular phone battery connecter repair ways solution
Blackberry 9900 cellular phone battery connecter repair ways solution many time phone battery connector line damage no have line for phone this problem have working solution only see my solution and try this jumper i think 100% working your battery connector problem solved and again working phone
Blackberry 9860 cellular phone charging ways 100% working solution
this solution my phone solved this solution try this blackberry 9900 battery connector not working connect battery with phone but not on phone this problem solved my solution see my solution blackberry 9900 battery connector line damage solution blackberry battery connector guide solution blackberry battery in but not on phone solution try step by step 100% solved your problem.
Subscribe to:
Posts (Atom)